€28,49

Staffelpreise vorhanden!

Dinah LED batten luminaires produce a uniform and soft light without visible LEDs. The metal brackets on the back ensure a stable and the plug-in terminals for a quick installation on ceilings and walls as well as on pendants.

The luminaire can be through-wired in just a few steps.. Cable entry is possible from two sides. White painted sheet steel and a cover of high-performance polycarbonate give the batten luminaire a high degree of stability and low weight. high stability with low weight. The shape is simple and timeless.

With Dinah technology, you can achieve energy savings of up to 50% compared to similar luminaires. It is maintenance-free with a useful life of 50,000 hours. Dinah batten luminaires are available in a wide range of dimensions and are especially are particularly suitable for supermarkets, corridors, canteens, side rooms and cove lighting..

  • Shipping flat rate

    Cheap shipping

  • Warranty

    up to 5 years warranty

  • Worry free test

    14 days simple return

  • After-Sale Service

    24/7 support

  • Technical information
  • Scope of delivery
  • Downloads

Product

LED light strip

Type

Dina

Input voltage

230V

Input frequency in Hz

50-60

Colour temperature in K

4000/6500

Warranty

5 years

Lifetime in hours

50,000 L70/B50@25°C (learn more)

Light efficiency in lm/W

 110

Protection class of the luminaire

IP20

Impact strength (IK)

IK02

Housing material

Iron

max. Ambient temperature

-20°C to +40°C

Radiation angle in °

120

LED

SMD2835

LED board replaceable

Energy efficiency class

D

Weight in kg

0.8-1.9kg

Width in mm

63

Height in mm

76

Width in mm with packaging

69

Height in mm with packaging

81

Reflector material

Iron

Material cover

translucent polycarbonate

CRI

>80

Certification

ROHS, GS, CE

Meas. environmentst.

25 degrees

Colour tolerance/colour space

(0.38, 0.38) SDCM ≤4

Power factor (min.)

≥0,92

Switch-on time in μs

103

Inrush current in A

19

Protection class

l

Luminous flux tolerance in %

±10 %

Tolerance for power consumption in %

10%

Glow wire test

80 degree

Housing colour

RAL9003

Fastening material

Stainless steel

Distance between fastening points

Retaining clips can be moved along the entire length of the luminaire

Connection

Drawer for electrical connection with double terminal strip 3*1mm² - 3*2

  • LED luminaire

  • 2 x holding clamps

  • 2 x screw

  • 2 x dowel

  • Operating instructions

A CLOSER LOOK

DISCOVER THE DINAH

Simple connection

A quick and easy wiring

Through-wiring

Available as through-wiring with cable entry at both ends makes handling the luminaire extremely convenient.

Stainless steel bracket

The stainless steel brackets for mounting can be moved and reused thanks to the existing drill holes

WHY CHOOSE US

SIMPLE OPERATION, COMPREHENSIVE Service

LED luminaires and accessories

SIMILAR PRODUCTS

FIND YOUR QUESTION HERE

FREQUENTLY ASKED QUESTIONS

What makes a moisture-proof luminaire?

Luminaires used in damp rooms must be specially protected against the ingress of water and moisture. They carry at least protection class IP X4.

Damp-proof luminaires are mainly used in industry and trade, but they are also the right choice for garages, swimming pools and basements. The higher the protection rating of the moisture-proof luminaire, the less it gets dirty - and the longer the maintenance intervals.

Can I connect these via a motion sensor?

Yes, it works!

Is it possible to connect the lamp in the middle of the housing or only at the ends?

Only at one of the two ends.

I have lost the retaining clips? Can I get them separately?

Yes, no problem at all! Just give us a call or send us an e-mail. It's even easier via the contact form.

Is it possible to change the bulbs in this lamp ?

You cannot change the bulbs. This makes the luminaire brighter and more efficient. However, it is not necessary to replace the bulbs, as the life span is at least 5 years if the luminaire is used 24 hours a day.

Do the luminaires have a CE marking?

Of course

What is the spacing of the fixings on the lamp? Can you slide the brackets back and forth on the housing as you like?

The brackets can be moved freely

You cannot find an answer to your question?

Call us at 06036/9879820 or send us an e-mail at engel@engel-lighting.de.

E-mail address*

Your question*

Copyright © by Engel Lighting