Product
LED wall/ceiling light
Type
Calla
Input voltage
230V
Input frequency in Hz
50-60
Colour temperature in K
3000/4000
Warranty
5 years
Lifetime in hours
50.000 L70/B50@25°C(learn more)
Light efficiency in lm/W
110
Protection class of the luminaire
IP66
Impact strength (IK)
08
Housing material
Polycarbonate
max. Ambient temperature
-25°C to +40°C
Radiation angle in °
120
LED
SMD2835
LED board replaceable
E
Weight in kg
1,2-1,4kg
Width in mm
322
Height in mm
322
Width in mm with packaging
Height in mm with packaging
77
Reflector material
-
Material cover
translucent polycarbonate
CRI
>80
Certification
CE, CB, EMC, RoHS
Meas. environmentst.
25 degrees
Colour tolerance/colour space
(0.38, 0.38) SDCM ≤4
Power factor (min.)
≥0,9
Switch-on time in μs
53
Inrush current in A
44,5
Protection class
II
Luminous flux tolerance in %:
10%
Tolerance for power consumption in %:
10%
Glow wire test
850 °C, duration: 30s
Housing colour
Fastening material
Stainless steel
Distance between fastening points
Connection
LED luminaire
2 x screw
2 x dowel
A CLOSER LOOK
Master/slave system
Any movement is detected from any direction, all luminaires switch on synchronously. If no movement is detected in the detection area, all luminaires are dimmed synchronously and time-controlled to a low light level and then switched off.
Through-wiring
Five-core wiring
Configuration
With motion sensor (Calla Sensor) and adjustable detection range, lighting duration, stand-by time, colour temperature, daylight sensor and dimming intensity.
WHY CHOOSE US
LED luminaires and accessories
FIND YOUR QUESTION HERE
What makes a moisture-proof luminaire?
Luminaires used in damp rooms must be specially protected against the ingress of water and moisture. They carry at least protection class IP X4.
Damp-proof luminaires are mainly used in industry and trade, but they are also the right choice for garages, swimming pools and basements. The higher the protection rating of the moisture-proof luminaire, the less it gets dirty - and the longer the maintenance intervals.
Can I connect these via a motion sensor?
Yes, it works!
Is it possible to connect the lamp in the middle of the housing or only at the ends?
Only at one of the two ends.
I have lost the retaining clips? Can I get them separately?
Yes, no problem at all! Just give us a call or send us an e-mail. It's even easier via the contact form.
Is it possible to change the bulbs in this lamp ?
You cannot change the bulbs. This makes the luminaire brighter and more efficient. However, it is not necessary to replace the bulbs, as the life span is at least 5 years if the luminaire is used 24 hours a day.
Do the luminaires have a CE marking?
Of course
What is the spacing of the fixings on the lamp? Can you slide the brackets back and forth on the housing as you like?
You cannot find an answer to your question?
Call us at 06036/9879820 or send us an e-mail at engel@engel-lighting.de.
Copyright © by Engel Lighting
